FROM THE TROUBLESHOOTING LIBRARY
Bose QuietComfort Headphones F27 Error Code Fix
Amazon links are affiliate links. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
What This Error Means
F27 on Bose QuietComfort headphones basically means: battery / charging control fault.
In plain terms, the headphones are not talking properly to their battery, so they refuse to charge, turn on reliably, or finish a firmware update.
Bose does not publish a public list of F-codes, but in practice F27 almost always pops up when the battery or charging system misbehaves.
Official Fix
Do the boring, official stuff first. This is the warranty-safe path Bose expects you to take.
- 1. Power-cycle the headphones properly
- Unplug any USB cable.
- Turn the headphones fully off (switch to Off, not Bluetooth/pairing).
- Leave them off for at least 30 seconds.
- Now plug them into a wall USB charger and leave them alone for 5 minutes.
- After 5 minutes, try powering them on while still connected to power.
- 2. Rule out a bad charger or cable
- Swap to a different USB cable that you know works with another device.
- Use a simple 5 V phone charger or a USB port on a laptop.
- Avoid fancy multi-port fast chargers for this test; keep it basic and 5 V.
- If F27 disappears with a new cable/charger, the headphones are fine. Toss the old power gear.
- 3. Update the firmware with the Bose app
- Install the Bose Music app on your phone.
- With the headphones charging, open the app and add the headphones if they are not already there.
- Go into the device settings and run any available firmware update.
- Let it finish. Do not unplug or power off until the app says it is done.
- When the update completes, power-cycle the headphones again and see if F27 is gone.
- 4. Do a factory reset (model specific)
- In the Bose Music app, look for an option like ‘Reset’ or ‘Restore factory settings’ and run it if available.
- If the app does not offer it, check the official manual for your exact QuietComfort model for the reset button combo and follow that.
- After the reset, reconnect the headphones in the app and test charging and power-on again.
- 5. Try a different power source and outlet
- Plug the charger into a different wall outlet, not a power strip or USB hub.
- If you can, test in a different room or building to rule out a dodgy outlet or surge protector.
- 6. If F27 keeps returning, contact Bose support
- By now you have done the official checklist: cable, charger, update, reset, outlets.
- Persistent F27 usually means a failing battery pack or charging board inside the earcup.
- Contact Bose support with your model and serial number. Ask for their repair or exchange price and whether it is covered under warranty.
Is It Worth Fixing? (The Financial Verdict)
- ✅ Fix: Headphones are in warranty, or Bose offers a flat-rate repair that is under roughly half the price of a new QuietComfort, and the rest of the headset (hinges, pads, sound) is in good shape.
- ⚠️ Debatable: Out of warranty and the repair quote is getting close to a decent mid-range replacement, or you already have minor issues like shorter battery life and worn pads but still like the sound and ANC.
- ❌ Replace: Bose wants near new-price, the headband or hinges are cracked, ear cushions are shot, or the headphones are 5+ years old with weak battery life even when they are working.
Parts You Might Need
Affiliate links. This site earns a commission from qualifying Amazon purchases. The links below open Amazon searches; check the exact model and part number before buying. Read the affiliate disclosure.
As an Amazon Associate we earn from qualifying purchases.